Jbl-synthesis SDP-45 4K Uživatelský manuál

JBL SYNTHESIS SDP-45 SERIAL PROTOCOL April 4, 2014 SDP-45 Firmware Revision: 2014.03e Protocol Version: 1.0 Document Version: 1.01 (minor updates to

DN Down 1 step (0.5dB) xxxx 0880..1120 (-12.0..12.0dB) QS Query Status RFVL Right Front Vol Trim UP Up 1 step (0.5dB) DN Down 1

xxxx 0880..1120 (-12.0..12.0dB) QS Query Status RBVL Right Back Vol Trim UP Up 1 step (0.5dB) DN Down 1 step (0.5dB) xxxx 0880

(Fr/C/Sur/Back/Sub) 00 no change or unknown 01 S/S/S/S2/Y 02 L/S/S/S2/N 03 L/L/L/L2/N 04 L/N/N/N/N 05 L/L/L/L2/Y 06 L/L/S/S2/Y

AFMT Query Input Format (Program Format) QS Query, returns prog format as 8 digit hex bit-flags: BIT0 Left BIT1 Right BIT2 Center B

ff: unknown INFO Query system info QS Query, returns system data in as a long string (typ <300 chars) broken into

QS Query, returns video format code xx in hex: 00: invalid, unknown, unchanged -- TV -- 01: 640x480p_60Hz 02: 720x480p 60Hz 03: 72

29: 1280x720p_100Hz 2a: 720x576p_100Hz 2b: 720x576p_100Hz wide 2c: 720x576i_100Hz 2d: 720x576i_100Hz wide 2e: 1920x1080i_120Hz

93: PC_720x400p_85Hz 94: PC_640x480p_85Hz 95: PC_800x600p_85Hz 96: PC_1024x768p_85Hz 97: PC_1152x864p_85Hz 98: PC_1280x960p_85Hz

Introduction This document is intended for users who wish to provide their own user interface or control system for an SDP45 system. The below control

Command format: ASCII strings ended with carriage return (code 13). All Host Controller commands (input to SDP-45) and SDP-45 Response (feedback) use

Acknowledgement Commands: No changes need to be made to receive Acknowledgment from the SDP-45. The SDP-45 will respond back to any command with the c

Command List COMMAND Bytes C1,C2,C3,C4 PARAMETER Bytes P1,P2,.. DESCRIPTION All feedback is in the same format. In this way the response will echo the

MMUT Main Mute 00 Mute Off 01 Mute On 02 Mute toggle QS Query Status ZSRC Zone Source 00 Blu-ray 01 SAT / VBL 02 Game

RI Right information. UP Up DN Down SL Select EX Exit one menu out, go from Zone to Main See Auto Save below QS Query status 00 = top (idle

01 Pro Logic (emulates the old standard!) been decoded. To see what the input signal bitstream decoding is (DD5.1, TRU-HD, etc…) use INPT to querry t

0e: DTS12 (DVD IEC Type 12) 0f: DTS13 (DVD IEC Type 13) 10: DTS14 (CD 14-bit) 11: DTS16 (CD 16-bit) 12: WMP (WMA Pro) 13: MP3 14: